 | ◆Can supply power to wireless AP and IP Camera ◆24*10/100Mbps auto-sensing RJ45 ports, 2*gigabit combo TP/SFP ports |
This PS28-2422-SFP switch provides a network point for power supply and data transmission. All the 24 POE ports can be connected with 10/100Mps quickly, and the uplink port is 1.25Gbps fiber interface, among which 1-24 ports can provide standard IEEE802.3af power supply. Due the advanced self-sensing algorithm supply power for IEEE802.3af terminal unit only, there is no need to worry about damaging proprietary POE or non-POE standard equipment. In addition, it will stop power supply when POE devices are not connected. In short, The PS28-2422-SFP features simple and reliable design, automatic identification POE requirements, duplex and high-speed.
This cost-effective PS28-2422-SFP provide network layout need to simplify wireless access point (AP) and IP-based surveillance cameras network cameras in order to install in commercial network and home network. The devices far away from power socket are very suitable for hanging on the wall or ceiling. POE eliminates the need for connecting these devices to power socket. So it make more flexible for those difficult to connect with AC power socket, and cut down the installation cost. It is ideal choice for those want to deploy a small commercial network and home network that use wireless access point (AP) and IP-based surveillance cameras. |
| Specification | |
Product Name | 28-Port 10/100Mbps POE Switch |
Model | PS28-2422-SFP |
Connector Type | 24x 10/100M copper cable RJ45 ports(all ports support MDI/MDIX) 2x 10/100/1000M combo ports |
Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 and more UTP(≤100 meter) |
Bandwidth | 8.8Gbps (non-blocking) |
Address Database Size | 4K |
MTBF | 100,000 hours |
Network Latency | maximum delay less than 20 microseconds |
Forwarding Mode | Store-And-Forward |
Buffer Memory | 2.75M |
Network Protocols | IEEE 802.3i 10BASET IEEE 802.3u 100BASETX IEEE 802.3x Flow Control IEEE 802.3af DTE Power via MDI IEEE 802.3af/a |
LED Display | System: power supply Every Port: connecting, POE working status |
Power Supply | AC100-240V 50/60Hz; (every country use a custom power plug) |
PoE Ports | 24*POE Ports |
PoE Port Power | Max 30W |
PoE Standard | IEEE 802.3af/at |
Working Environment | Operating Temperature: -20° ~ 55° C Storage Temperature: -20° ~ 75° C Humidity: 10% ~ 90%, non-condensing Storage Humidity: 10% ~ 95%, non-condensing Working Altitude: 3000 m (10,000 ft) Storage Altitude: 3,000 m (10,000 ft) |
Certification | CE Mark ,commercial CE/LVD EN60950 |
Radiation | CE mark, commercial FCC Part 15 Class B VCCI Class B EN 55022 (CISPR 22), Class B |
Product Size | 440*210*44mm |
Weight | 3.2Kg |
 |
|||
| PS28-2422-SFP | |||
|---|---|---|---|
